All-Natural Moisturizing Lotion with Essential Oils

Our skin is very porous and absorbs just about everything we put on it. Many body care products on the market today often contain ingredients we wouldn’t want inside our bodies. So, when our skin gets dry, why not rub in some homemade, all-natural, moisturizing lotion with essential oils instead of store-bought lotions?

Lotion can be fairly simple to make as long as you have the proportions of oil and water correct. What really makes the oil and water become lotion is a process called emulsion. Emulsion simply means finely blending insoluble substances, such as oil and water. So, the very basics of creating lotion are to melt your oils and let them cool together and then emulsify with water and blend thoroughly until it creates a lotion consistency. For more information about lotion making, see the “Basic Body Cream” brochure by Tamalu Watkins.

Here’s a simple lotion recipe that has a thin consistency—perfect for containers with lotion pumps!

Step 1. Combine 1/8 cup (or 2 Tbsp.) of old fashioned oats and 1/2 cup distilled water. Cover, and let soak for 12 hours (starting this the night before works great!). If you don’t have distilled water, you can use regular tap water as long as you boil it and allow it to cool before mixing it with the oats. Distilled water is best when making lotions because it doesn’t contain the minerals and other stuff found in regular tap water that can increase the likelihood of mold growth in the lotion. The picture above is the oatmeal after sitting for about 12 hours.

Step 2. After the oats have soaked for 12 hours, use a spatula to strain out the oatmeal water. This liquid should appear a little cloudy. If needed, use the spatula to squeeze the liquid from the oats. Set aside 1/4 cup of the oatmeal water. Discard or eat the oats.

Fun Fact: Oatmeal helps fight dryness in skin by leaving a fine protective film on the skin. It also is full of healthy lubricating fats that help to moisturize the skin. The proteins in oatmeal help maintain the skin’s natural barrier function and are filled with natural cleansers that gently remove dirt and oil from the pores of the skin.¹

Extra Idea: Since our goal is to get a thin lotion that works in these acrylic lotion pumps, we soaked the oatmeal to try to get many of the natural cleansing properties in the water. If you want a thicker lotion and all the benefits of the oatmeal, try blending the oats to a powder and using 1/4 cup distilled water and 1–2 Tbsp. of the oat powder. Let the oat powder and water soak for a little bit before mixing all of it with the oils.

Step 3. Combine 1/4 cup jojoba oil, 1/4 cup coconut oil, 1 1/2 Tbsp. beeswax pellets, 1/2 Tbsp. vitamin E oil, and 1/2 Tbsp. honey in a glass bowl.

Step 4. Melt the oils in the microwave or on the stovetop in a pan filled with an inch of simmering water (creating a double boiler). Heat until completely melted. The beeswax will take the longest, so make sure to use pellets or grate finely.

Step 5. Once completely melted, pull the glass dish out of the pan with a hot pad. Grab a towel, and fold it around the bottom of the glass dish. Place towel and glass dish in the refrigerator to cool off for 10 minutes before placing in the freezer (towel and all) for 10–15 minutes. If you have time to wait, you can leave it in the fridge for an additional 35 minutes instead of placing it in the freezer.

Note: Some glass dishes can break if the temperature change is too drastic, so use caution. Wrap a towel around and under the dish, and then let it cool first in the fridge before placing it in the freezer. The towel keeps the glass from touching anything really cold.

After the oil has cooled, it should have a texture like in the picture above. You don’t want it to be too solid so that you can’t blend it. If you let it cool for too long, you will have to melt it and cool it again.

Step 6. Mix together the cooled oil mixture, 1/4 cup of oatmeal water, and 4–6 drops of essential oil with a handheld or stand electric mixer. Whip for a few minutes until thickened and lotion-looking. (This is the emulsion process!)

Step 7. Pour the lotion into a plastic bag. With scissors, cut off a corner of the bag just a tiny bit, and squeeze the lotion into an empty lotion bottle. You can also use a tiny funnel to make this process easier.

This recipe makes about a cup (8 oz.) of lotion. If you use the 30 ml Acrylic Lotion Pump Bottles, this recipe will fill 5 bottles. If you use the 50 ml Acrylic Lotion Pump bottles, this recipe will fill 4 bottles. Any other lotion pump bottle will also work.

The acrylic pump bottles are unique because they operate on a vacuum principle instead of using a stem or tube. When you pump, it first releases air pockets; then as you pump more, the bottom piece pushes the lotion up and out the hole. This allows you to not only see how much lotion you have left but also to enjoy every last bit of your homemade lotion!

Store this lotion at room temperature (75 degrees Fahrenheit) or less. If you know it will be hotter than 75 degrees, you can store it in the fridge to keep the oil and water from separating. However, if stored in the fridge, it may need to be brought back to room temperature before using in a pump bottle.

All-Natural Moisturizing Lotion with Essential Oils

Servings: Yield = 8 oz. of lotion | Time: 30 minutes active; 12 hours, 25 minutes inactive | Difficulty: Easy

Ingredients and Materials Needed:

• 1/2 cup distilled water
• 1/8 cup old fashioned oats
• 1/4 cup jojoba oil or almond oil (olive oil would work too)
• 1/4 cup coconut oil
• 1 1/2 Tbsp. beeswax pellets (use more if you want a thicker lotion)
• 1/2 Tbsp. vitamin E oil (for its benefits to the skin as well as for preservation of the lotion)
• 1/2 Tbsp. raw honey
• 4–6 drops essential oil of your choice.
• Lotion Bottle(s): We recommend a bottle with a lotion pump, such as the Acrylic Lotion Pump Bottles, since this recipe makes a thinner lotion.

Instructions:

1. Combine the old fashioned oats and distilled water. Cover, and let soak for 12 hours (starting this the night before works great!). Distilled water is needed to inhibit mold growth. If you don’t have distilled water, you can use regular tap water as long as you boil it and allow it to cool before mixing it with the oats.
2. After the oats have soaked for 12 hours, use a spatula to strain out the oatmeal water. This liquid should appear a little cloudy. If needed, use the spatula to squeeze the liquid from the oats. Set aside 1/4 cup of the oatmeal water. Discard or eat the oats.
3. Combine the jojoba oil, coconut oil, beeswax pellets, vitamin E oil, and honey in a glass bowl.
4. Melt the oils in the microwave or on the stovetop in a pan filled with an inch of simmering water (creating a double boiler). Heat until completely melted. The beeswax will take the longest, so make sure to use pellets or grate finely.
5. Once completely melted, pull the glass dish out of the pan with a hot pad. Grab a towel, and fold it around the bottom of the glass dish. Place the towel and glass dish in the refrigerator to cool off for 10 minutes before placing in the freezer (towel and all), or just leave in the refrigerator for another 35 minutes until mixture is soft and cool.
   Note: Some glass dishes can break if the temperature change is too drastic, so use caution. Wrap a towel around and under the dish; then let it cool first in the fridge before placing it in the freezer. The towel keeps the glass from touching anything really cold.
6. Mix together the cooled oil mixture, 1/4 cup of oatmeal water, and 4–6 drops of essential oil with a handheld or stand electric mixer. Whip for a few minutes until thickened and lotion-looking.
7. Pour the lotion into a plastic bag. With scissors, cut off a corner of the bag just a tiny bit, and squeeze the lotion into an empty lotion bottle.

Store this lotion at room temperature (75 degrees Fahrenheit) or less. If you know it will be hotter than 75 degrees, you can store it in the fridge to keep the oil and water from separating. However, if stored in the fridge, it may need to be brought back to room temperature before using in a pump bottle.

This recipe makes about a cup (8 oz.) of lotion. If you use the 30ml Acrylic Lotion Pump Bottles, this recipe will fill 5 bottles. If you use the 50ml Acrylic Lotion Pump bottles, this recipe will fill 4 bottles. Any other lotion pump bottle will also work.

Sources:
¹ http://www.sharecare.com/health/skin-hair-nail-beauty/article/why-your-skin-craves-oatmeal